HomeHome
HomeHome
HomeHome
HomeHome

CLAMP 2 TONNE BEAM 3/16 JAW

Part #:2703838
CLAMP 2 TONNE BEAM 3/16 JAW

CLAMP 2 TONNE BEAM 3/16 JAW

Part #:2703838
$849.00
IPBK10 - 2t H-Beam Clamp for Vertical Lift & Transfer w/Pretension Lock 0.19-1" Jaw • The IPBK10 beam clamp is used for lifting, transferring and stacking H-Beams. A ring-center hoist eye allows for the beam flange to remain vertical. This series of clamps can be used in vertical and horizontal moving, transferring and stacking of different types of structural designs, such as H-Beams, angles, etc, depending on the application desired. • Welded alloy steel body for strength and smaller size. Forged alloy components, where required. • Individually Proof Tested to 2 times the Working Load Limit with certification. • Company name (Crosby IP), logo, Working Load Limit and jaw opening permanently stamped on body. • Each product is individually serialized, with the serial number and Proof Load test date stamped on body. User manual with test certificate is included with each clamp. • Maintenance and repair kits are available. • Minimum WLL of 10% of Maximum WLL. • For use with materials with a plate surface hardness to 279HV10, only 5% min WLL is needed. •Design Factor based on EN 13155 and ASME B30.20.
IPBK10 - 2t H-Beam Clamp for Vertical Lift & Transfer w/Pretension Lock 0.19-1" Jaw • The IPBK10 beam clamp is used for lifting, transferring and stacking H-Beams. A ring-center hoist eye allows for the beam flange to remain vertical. This series of clamps can be used in vertical and horizontal moving, transferring and stacking of different types of structural designs, such as H-Beams, angles, etc, depending on the application desired. • Welded alloy steel body for strength and smaller size. Forged alloy components, where required. • Individually Proof Tested to 2 times the Working Load Limit with certification. • Company name (Crosby IP), logo, Working Load Limit and jaw opening permanently stamped on body. • Each product is individually serialized, with the serial number and Proof Load test date stamped on body. User manual with test certificate is included with each clamp. • Maintenance and repair kits are available. • Minimum WLL of 10% of Maximum WLL. • For use with materials with a plate surface hardness to 279HV10, only 5% min WLL is needed. •Design Factor based on EN 13155 and ASME B30.20.