HomeHome
Our Brampton branch has moved to a new location in Mississauga! Learn more.

CLAMP 2 TONNE LIFTING UNIVERSAL 0-1-3/8

Part #:2701677
CLAMP 2 TONNE LIFTING UNIVERSAL 0-1-3/8

CLAMP 2 TONNE LIFTING UNIVERSAL 0-1-3/8

Part #:2701677
$1,587.00
IPU10 - 2t Vertical Lifting Clamp w/Universal Eye 0-1 3/8" Jaw • Standard clamp for materials with a surface hardness to 363HV10 (345 HB). • Model IPU10R (remote control opening and closing via a cable) on request. • Model IPU10W (wedge) available on request. • Welded alloy steel body for strength and smaller size. Forged alloy components, where required. • Individually Proof Tested to 2 times the Working Load Limit with certification. • Company name (Crosby IP), logo, Working Load Limit and jaw opening permanently stamped on body. • Each product is individually serialized, with the serial number and Proof Load test date stamped on body. User manual with test certificate is included with each clamp. • Full 180° turning range for material transfer, turning or moving. • Lock open, lock closed ability with latch for pretension on material and then release of material. • Maintenance and repair kits are available. • Minimum WLL is 10% of maximum WLL. • For plate surface hardness to 279HV10, only 5% minimum WLL is needed. • Design Factor based on EN 13155 and ASME B30.20.

Description

IPU10 - 2t Vertical Lifting Clamp w/Universal Eye 0-1 3/8" Jaw • Standard clamp for materials with a surface hardness to 363HV10 (345 HB). • Model IPU10R (remote control opening and closing via a cable) on request. • Model IPU10W (wedge) available on request. • Welded alloy steel body for strength and smaller size. Forged alloy components, where required. • Individually Proof Tested to 2 times the Working Load Limit with certification. • Company name (Crosby IP), logo, Working Load Limit and jaw opening permanently stamped on body. • Each product is individually serialized, with the serial number and Proof Load test date stamped on body. User manual with test certificate is included with each clamp. • Full 180° turning range for material transfer, turning or moving. • Lock open, lock closed ability with latch for pretension on material and then release of material. • Maintenance and repair kits are available. • Minimum WLL is 10% of maximum WLL. • For plate surface hardness to 279HV10, only 5% minimum WLL is needed. • Design Factor based on EN 13155 and ASME B30.20.