HomeHome
SHIPPING IS LIVE! 🎉 We’re excited to announce that all customers nationwide can now easily place orders and have them delivered directly to their preferred locations.
HomeHome
HomeHome
HomeHome

TURNBUCKLE 1X24 JAW&EYE GALV

Part #:1032233
TURNBUCKLE 1X24 JAW&EYE GALV

Please note: images may not be exact representations. Always refer to manufacturer's specifications.

TURNBUCKLE 1X24 JAW&EYE GALV

Part #:1032233
$516.00
End fittings are Quenched & Tempered or normalized, bodies heat-treated by normalizing. Hot-dip galvanized steel. Turnbuckles eyes are forged and elongated, by design, to maximize easy attachment in system and minimize stress in the eye. For turnbuckles size 1/4 through 2-1/2, a shackle one size smaller can be reeved through eye. Forged jaw ends are fitted with bolts and nuts for 1/4 through 5/8, and pins and cotters on 3/4 through 2-3/4 sizes. Modified UNJ thread on end fittings for improved fatigue properties. Body has UNC threads. TURNBUCKLES RECOMMENDED FOR STRAIGHT OR IN-LINE PULL ONLY. Lock nuts available for all sizes. Fatigue rated to 20,000 cycles at 1-1/2 times the Working Load Limit. Meets or exceeds all requirements of ASME B30.26 including identification, ductility, design factor, proof load, and temperature requirements. Importantly, these turnbuckles meet other critical performance requirements including fatigue life, impact properties, and material traceability, not addressed by ASME B30.26. Meets the performance requirements of Federal Specifications FF-T-791b, Type 1 Form 1 - CLASS 8, and ASTM F-1145, except for those provisions required of the contractor. For additional information, see warnings and applications section.

Description

End fittings are Quenched & Tempered or normalized, bodies heat-treated by normalizing. Hot-dip galvanized steel. Turnbuckles eyes are forged and elongated, by design, to maximize easy attachment in system and minimize stress in the eye. For turnbuckles size 1/4 through 2-1/2, a shackle one size smaller can be reeved through eye. Forged jaw ends are fitted with bolts and nuts for 1/4 through 5/8, and pins and cotters on 3/4 through 2-3/4 sizes. Modified UNJ thread on end fittings for improved fatigue properties. Body has UNC threads. TURNBUCKLES RECOMMENDED FOR STRAIGHT OR IN-LINE PULL ONLY. Lock nuts available for all sizes. Fatigue rated to 20,000 cycles at 1-1/2 times the Working Load Limit. Meets or exceeds all requirements of ASME B30.26 including identification, ductility, design factor, proof load, and temperature requirements. Importantly, these turnbuckles meet other critical performance requirements including fatigue life, impact properties, and material traceability, not addressed by ASME B30.26. Meets the performance requirements of Federal Specifications FF-T-791b, Type 1 Form 1 - CLASS 8, and ASTM F-1145, except for those provisions required of the contractor. For additional information, see warnings and applications section.